Episensor Wireless Products
Zigbee based Energy Monitors & Sensors
Synctek are proud to introduce Episenor as one of our most distinguised partners. EpiSensor is a global leader in a new technology based on ZigBee protocols. Described as an ‘Internet of things’ this allows devices to communicate wirelessly at low energy consumption with reduced maintenance, control and monitoring cost.

EpiSensor has developed products for energy consumption monitoring, street light control, water quality monitoring and, building climate control. EpiSensor is one of the first companies in the world to invent, productise and sell reliable, cost effective and easy to deploy products, using ZigBee wireless sensor networks.

With the full support and terchnical experinece of Episensor, Synctek provide ongoing system integration, development and application deployement as specialists for Episensor Wireless based systems. The Episensor range provides a secure, cost-effective two-way communication system for the real-world domain of sensors, controllers and user displays.
EpiSensor has recently release the ZEM-50 8-channel Wireless  Energy Monitor which provides a highly accurate means of remotely monitoring energy consumption patterns for up to 8 appliances and electrical circuits consuming up to 20 kW per channel. This Zigbee based wirelss energy monitor allows operation in very large mesh networks and is fully capable of monitoring your energy consumption down to the finest detail.

These devives are ideally suited for is in small (sigle households) or in very large industrial or commercial buildings. Synctek can provide complete system integration of these unique devices for any application requirement.
Episensor Applications include:

Wireless Street Lighting & Control

Wireless Building Energy Monitoring

Wireles  Enviromental Monitoring & Control

Wireless Transport & Asset Monitoring
Zigbee Wireless Network Gateways
The NGH-10 High Gain Network Gateway provides a connection between the ZigBee wireless sensor network and the IT infrastructure. The High Gain directional antenna is intended for situations where longer or more difficult communications paths apply. It is also designed to cater for situations where positioning the Network Gateway outside is required.
Zigbee Wireless Street Lighting Controls
EpiSensor’s SLC-10 Street Light Controller provides a highly accurate means of remotely monitoring energy consumption patterns of Street Lights. It also provides on/off control of large arrays of street lights from a central location. The unit uses a wireless module based on the ZigBee standard and relays data over the network using EpiSensor's SiCA Platform.
SLC-10's can connect together is a mesh network to an EpiSensor Network Gateway and can provide a user with valuable fault detection information, lamp burn times and energy consumption data. These units can also be used for load shedding and other energy saving initiatives. The SLC-10 can be installed very easily using a standard NEMA socket or can be hard wired into a luminaire.

Zigbee Wireless Enviromental Sensors
The TES-20 Temperature Sensor is an outdoor version of the TES-11 real-time temperature monitoring device. It operates as a ZigBee end device on a network. It can achieve a 10 year battery lifetime using an inbuilt longlife permanent battery by switching into low power “sleep” mode between its typically 10-minute reporting intervals. It uses the Z31 Module for network connectivity - a compact, programmable device specially designed for the EmberZNet ZigBee™ PRO API Stack for wireless mesh networks.

The in-built ZigBee application and Ember stack manage the process of temperature reading and logging, as well as communicating the results over the network at programmable intervals. It is housedin an IP-67 weatherproof enclosure.
Zigbee Wireless Network Gateways
The NGH-10 High Gain Network Gateway combines a Z31 USB ZigBee Module with a more directional antenna to boost signal levels between it and other wireless network devices.

ZEM-50 8 channel Wireless Energy Monitor
Zigbee Wireless modules
The Z40 ZigBee Module is a compact, programmable device specially designed for the Ember ZNet ZigBee™ PRO Stack for wireless mesh networks. Using the Ember EM250 radio and microcontroller chip, it has a 10-pin InSight Adapter port to allow easy programming from Ember Development Kits and can be programmed as a ZigBee Co-ordinator, Router or End Device. It also has a 20-pin I/O connector, which also allows for connection to a nominal 3V DC power source. An on-board memory to allow over-the-air firmware modifications without having to physically access devices that may already be deployed in the field is also included. The module is only 28mm x 30 mm in size. It can be supplied with an on-board omnidirectional chip antenna or an MMCX or U.FL connector for an external antenna.
 
Load Monitor Load Monitors and
Electronic Load Monitor Relay
Load Monitor Relay Shock Relay
Load Protection Relays and Load
Monitor with Energy Monitoring
Electronic Shear Pin Relay and
Electronic Load Protection Relay
Electronic Energy Monitors and
Load Energy Monitors Shock and
Force Relays Shear Pin Sensors
Elctronic Shear Pin Sensors and
Load Energy Monitor with Shear
Pin Relay Protection and PTC and
PTC Motor Thermistor Relay with
Speed Monitoring and Speed
Sensing Relay Under Speed and
OverSpeed Monitor with Torque Protection and Torque Monitor
and Torque Overload Relay and
Torque Protection System with
Energy Monitoring Load Sharing
Load Control and Load Shedding Load Monitor Relay Load Monitor
Load Monitoring System Relay
Load Sensing Relay Shock Relay
Electronic Shear Pin and Shock
Relay with 4-20mA cuurent loop
Current Sensing Voltage Sensing
Voltage Relay Current Relay and
OverCurrent Under Current and
OverVoltage and OverCurrent
UnderVoltage Under Current
Relay Phase Relay Phase Sense
Phase Sequence Phase Rotation
Power Factor Relay Power and
Power Factor Sensing Relays
Enegery Metering Energy Monitor
Energy Relay Power Relay and Power Monitors Power Sensor
Torque Relay Torque Monitors
Real Power Reactive Power and Active Power Monitor Energy
Phase Sequence Phase Failure Relay Core Balance Relay
Neutral Current Relay Energy and
Power Relay Power Factor Relay
4-20mA Converter Interface and
4-20 Voltage to Frequency Relay
Speed Relay Pulse Inputs Speed
Analog Inputs and VF Converter
Voltage to Current Converter and
Frequency to Current Converter
Load Control Relay Load Sensing
Load Sharing Load Shedding and
KVA KVAR KW KWH KVAH and
Energy Monitor Meter Sensor and
Relay Save Energy Save Power
Energy Savings Power Demand
Power Efficiency Power Control
Power Monitor Synctek Load and
Safety Relay Synctek Load Relay
Synctek Load Monitor Relay and
Electronic Shear Pin Relay and
Load Monitor Amps Volts Power
Factor Shock Relay Shock Relay Shock Sensor Shock Relay and
Electronic Shear Pin Sensor and
Energy Meter Systems Electronic
Clipsal Cbus Systems and Dali
Variable Speed Drives VF Drives
Eddy Current Drives DC Drives
AC Drives Electrical Services
Engineering Services Automation
Factory Automation Energy Cbus
Lighting Control Energy Monitors
Factory Automation Systems and
Home Automation Systems Cbus
Dali Lighting Control Solar Energy
PV Solar Cells and Systems and
Renewable Energy Systems and
Wind Energy Systems and Solar
Systems Battery Systems and
Energy Management SCADA and
PLC control Systems HMI SCADA
Renewable Energy Hydrogen
Systems and Eddy Current
Drives Eddy Current Controllers
Eddy Current Controls Brake and Clutch Controls Brake Controllers
Eddy Current Drives & Controls
DC Drives Servo Drives Library
Automation Magnetic Systems
Library Check-in Check-out and
EM tag systems Library systems
Wireless Energy Metering Zigbee
Energy Monitors Zigbee Wirless
Modbus RTU Clipsal Cbus PLC
Dali Systems Modbus RTU PLC
Load Monitor Load Monitors and
Electronic Load Monitor Relay
Load Monitor Relay Shock Relay
Load Protection Relays and Load Monitor with Energy Monitoring
Electronic Shear Pin Relay and Electronic Load Protection Relay
Electronic Energy Monitors and
Load Energy Monitors Shock and
Force Relays Shear Pin Sensors
Electronic Shear Pin Sensors and Load Energy Monitor with Shear
Clipsal C-Bus Systems C-Bus
C-Bus Home Automation System
C-Bus Energy Meter Interface
C-Bus connected Energy Meter
C-Bus interfaced Energy Meter
Modbus Energy Meter Modbus
Ethernet Energy Metering C-Bus
Connected Energy Meter C-Bus
Modbus RTU Energy Metering &
C-Bus connected Energy Meter &
C-Bus Lighting Relay Groups can be set and reset at any value
C-Bus Energy Meter Interface for Home & Building Automation Sys
C-Bus compatiable Energy Meter
C-Bus Network Energy Metering
Energy Meter with C-Bus C-Bus
Network Interface for Energy
Monitor Energy Consumption & Water Consumption, Gas Usage with C-Bus interface for Energy Metering System that allows monitoring of Energy via C-Bus interface & C-Bus Networks and Allows Multi-phase and Multi-Metering over C-Bus Interface & C-Bus connected systems
Energy Meters for Green Star
Accreditation Energy Monitoring for Green Star Accreditation
Energy Meters for Green Star
Accreditation Energy Monitoring for Green Star Accreditation
Energy Meters for Green Star
Accreditation Energy Monitoring for Green Star Accreditation
Energy Meters for Green Star
Accreditation Energy Monitoring for Green Star Accreditation
Energy Meters for Green Star
Accreditation Energy Monitoring for Green Star Accreditation
Energy Meters for Green Star
Accreditation Energy Monitoring for Green Star Accreditation
Energy Meters for Green Star
Accreditation Energy Monitoring for Green Star Accreditation
Energy Meters for Green Star
Accreditation Energy Monitoring for Green Star Accreditation
Energy Meters for Green Star
Accreditation Energy Monitoring for Green Star Accreditation


Synctek Pty Ltd
Electrical & Electronic Services
Load Monitors
Shock Relay
Proudly Australian
Australian Made
Australian Designed
Innovative Technology
Search this Site